Because our courtyard gate latch is a bit wonky, we prefer that packages be delivered to the rear of the house by the patio. Now, most carriers allow you to specify delivery instructions, but some of the drivers don’t get the message and try to open the courtyard gate which is a bit difficult. A lot of the time, they just dump the package out front outside of the courtyard. We saw this as a minor security risk, so today we installed the sign in a location that can be seen from the driveway and courtyard walkway.
The sign is installed on the electrical box where the house’s circuit breakers are located. The box is made of steel, so I needed a good drill bit for drilling four holes to accommodate #6 sheet metal screws. I also needed a center punch to locate the holes. We gave away most of my old tool collection to family when we left Kalifornistan, so I had to buy the tools again. Although this is not my first time to do “handyman” chores around the Arizona house, this was the first time that I had to get special tools.
So I went to the hardware store and bought some #6 sheet metal screws, a couple of 7/64 drill bits (they did not have a number 36 drill unless I bought a set) and a center punch to indent the locations for the drills. I previously got the sign from Amazon, so we were now ready to do the installation. It all went as planned and you can see the resulting installation in the (clickable) image above.
This is sort of a mundane post, but since we got the new WordPress theme customized, we are motivated to blog more regularly on topics like this that might be neither exciting nor controversial. Of course, we will continue to post about major occasions and events.